Posts Tagged ‘louis allis’
144 Control Boards are available ON LINE today – Bids Close on Tuesday November 8th – Then OPEN HOUSE time!
We pulled these ready for use Control Boards
For an ON LINE offering.
Easy to view, Easy to assess, Easy to buy!
By CLICKING on the Pictures, you can see the detail and how the units are packaged.
We tried to make this offering VERY EASY, Let us know what you think.
Contact me at eric.spirtas@niagaraworldwide.com
After this ON LINE offering,
NIAGARA Development is planning the
much anticipated “Open House”.
Paper Mill Complete Facility – Liquidation
Former – New Page Paper Mill
1101 Mill St., Niagara, WI USA
Through Jan. 15, 2012
By appointment, please call
Paper Mill Equip. New As of 2006:
Paper Machine 43
220” Paper Machine
Cincinnati Roll Grinder
Baghouse
4 Fields Electrostatic Precipitator
Hedemora Filter
Gardner Denver & Sullair Compressors
Actuators
Wet Lap Machine
Massive amount of Pumps
(2) Andritz Twin Wire Presses
Sprout-Walron & Beliot-Jones Refiners
Valmet Opti Reel
Voith Headbox’s
4-Station Kone Deck
Andritz Mixer
Dresser Log Loader
Much, Much More!
For equipment details & more information
Call Burdette Wilber (314) 616-8422 or Eric Spirtas (866) 735-9925
“Open House” at Former NewPage Plant (Nov 15th, 16th & 17th) Niagara Wisconsin – Get out of your office and see our Complete Warehouse of Industrial Equipment.
After months of organizing and preparation, NIAGARA Development LLC (Former NewPage Paper Mill in Niagara Wisconsin) is opening its doors for a complete facility Open House.
National and International Paper Makers as well as Worldwide Brokers and Equipment Suppliers are registering to visit the site. It is our intention to clear out all current equipment, spares and stores in order to enable follow on development soon after.
Dismantling and Rigging is available or qualified removal contractors are welcome to partake in the removal of purchased equipment.
By contacting us today, you can set up your private visit and receive additional information.
PAPER MAKING MANUFACTURERS
Voith, Nicholson, Manitowoc, Comact, Kone, Tampella, Electric Machinery, Gardner Denver, Advanced Dynamic, Yale, Dorr Oliver, Andritz, Jagenberg, Sprout-Walron, Beloit, Beloit Jones, Spencer, Goulds, Thune, Impco, Siemans, Nash, Solaronics, Jonsson, Bird, Hooper, Ahlstrom, Valmet, Noss, Celleco, Waukesha, Wauk / Lobeflo, Ronnigan Peters, Leblond, Cencennati, CE, GE, Clarge, Gunlach, Volvo, Hough, Baldor, Boston, Brook Hansen, Kolbe, Leeson, Leroy Somer, Lincoln, Louis Allis, Marathon, Morse, Reliance, Reuland, Rockwell Automation, Sew Eurodrive, Sterling, Sumitomo, Toshiba, US Electric, Westinghouse and others.
PAPER MAKING EQUIPMENT
Paper Machines, Pulp Grinders, Wet Lap Machine, Pulpers, Reel Systems, Kone Deck Feeder System, Press Systems, Mixers, Refiners, Air Compressors, Loaders, Cleaners, Pumps, Burners, Dewire/Destacker, Crushers, Fans, Screens, Filters, Turbines, Guillotine, Conveyors, Attenuator, Bag House, Precipitator, Pump, Bale System, Headbox, Fordinear, Drivers and Controls, MCC’s, Transformers, AC Units, PLC’s, Magnets, Scales and Much More!
Down load our newest FLYER today:
http://www.niagaraworldwide.com/external/WebImages/File/Brochures/Niagara_Worldwide_PaperMill_Print.pdf
Contact us today to set up a visit:
Eric J. Spirtas
Niagara Worldwide LLC
1101 Mill Street, Niagara Wisconsin 54151
314.780.3742 Direct – 866.735.9925 Fax
eric.spirtas@niagaraworldwide.com
www.niagaraworldwide.com
With such quick registration and a complete listing of the motors offered, it makes on-line buying a snap!
Niagara Worldwide LLC has put together a complete listing of all of the motors available, click on the picture below to link to details and for registration. This is an official Bid Spotter liquidation and can be found on the Bid Spotter web site.
The winner here is the one who registers and buys these units by tomorrow’s 10am Eastern Standard Time “Close”!
Contact me with any questions:
Eric J Spirtas 314.780.3742
eric.spirtas@niagaraworldwide.com
http://www.niagaraworldwide.com
I am so impressed with my people. On their own; they prepped, lotted, marketed and will perform a major MOTOR auction closing on October 20th! Way to go NIAGARA Worldwide Team!
It is exciting when your team is able to not only function on its own, but to grow and succeed. Creating opportunity for its clients without a hitch.
Get ready for the next NIAGARA Development liquidation, set to be performed by NIAGARA Worldwide LLC in association with GW & Associates. They will be selling a group of “A” rated motors for various industries, including the paper industry.
With a quick look at the lot book and an overview of the information, you will see the value of our next event. Get on line and down load the application to participate and get the deal of a lifetime.
Let me know if you need any help registering.
Eric J Spirtas – eric.spirtas@niagaraworldwide.com – 314.780.3742
There must be a demand for Paper Making Refiners, everybody wants the NIAGARA Worldwide 42 inch Beloit Double “D” Refiner!
Even with the amount of product on the market, there sure seems to be a demand for the refiners that we have in stock, from our 42 Inch Beloit Double “D”, to our Sprout-Waldron 42 inch unit.
Have you seen all of the NIAGARA Worldwide PRIVATE TREATY Offering’s?
EQUIPMENT TYPE: 42 Inch Beloit DD 4000 Refiner
- Manufacturer Beloit
- Model 4342 HS
- Serial No. D-3041
- Condition Excellent, well maintained
MOTOR DATA:
- Manufacturer Louis Allis
- Model/Type WP II X
- Serial No. 7AP144L-001
- Horse Power 1500 HP
- Speed 510 RMP
- Power Supply 4160
- Volts 3 Phase, 60 Hz, 1.15 S.F.
- Frame 7410 Z
EQUIPMENT TYPE: 42 Inch Sprout-Waldron Refiner
- Manufacturer Sprout-Waldron
- Model 42” T.F.
- Serial No. 82-1610
- Condition Good, well maintained
MOTOR DATA:
- Manufacturer GE (General Electric)
- Model 5TS 850750C3
- Serial No. EW 8431102
- Horse Power 1000 HP (Synchronous)
- Speed 514 RMP
- Power Supply 4160 Volts, 3 Phase, 60 Hz, 1.0 P.F.
- Frame 8507 Z
- Excitation 250 Volts DC, 36.1 Amps DC
Contact Me to discuss our other refiners, various equipment or even the Beloit and Sprout that you see here.
Let me know if you have any questions, as these units will be moving fast:
Eric J. Spirtas
NIAGARA Worldwide
314.780.3742 – eric.spirtas@niagaraworldwide.com
General Electric Steam Turbine 9375KW Generator with Condenser
PRIVATE TREATY OFFERING
Former Niagara “NewPage” Mill – Equipment Sales
Contact: Eric J. Spirtas TODAY – 314.780.3742 ericspirtas@ejspirtasgroup.com
EQUIPMENT TYPE:
STEAM TURBINE 9375kw
Specific Name – General Electric Steam Turbine Generator with Condenser
Turbine No. 164030 |
Generator No. 8328468 |
| – 9375KW | – 2 Poles |
| – 3600rpm | – 60 Cycles |
| – 14 Stage | – Air Cooled |
| – 450 PSIG | – 4160 V |
| – Temp. 675 F | – KVA: 12500 |
| – Exhaust Pressure 2.0 in HG ABS | – Stator Amperes: 1735 |
| – Field Amperes: 158 |
STEAM CONDITIONS:
– Throttle: Mt = 135kpph
– Extraction: Mext = 77kpph
– Absolute pressure: (Barometric pressure) – (Turbine vacuum)
– Throttle: Header pressure = 427
– Extraction: 53.6 psi
– Absolute pressure: PO = 29.96-27.6 = 2.36Hg absolute
– Throttle: Header temperature = 670 degrees F.
– Extraction: 347 degrees F.
– Power output : 8756KW 78% efficiency
ATTACHMENTS:
– Design Data
– Performance Curves
– Steam Path Drawing
– Mechanical Drawing
The CUT SHEET above as well as the attached PDF prints and diagrams are for a specific system or piece of equipment.
Please note that we have a massive amount of OTHER EQUIPMENT for your review and pricing (a sample of items are listed below).
Also available for sale are the complete STORES, WAREHOUSE, TOOLS, BEARINGS MACHINE SHOP and CARPENTRY SHOP.
In addition, ROLLING STOCK and LICENSED VEHICLES will be offered.
We are handling sales on an INTERNATIONAL basis, by direct negotiation. Offers are being received regularly and equipment is being sold.
Site visits, Rigging, Hauling, Payment Terms and other details can be discussed directly with Eric J. Spirtas – 314.780.3742
| WOODROOM / PGW | |||
| NUM | COMPONENT | DESCRIPTION | QTY |
| 1 | DEBARKER | Nicolson A5A 22″ | 1 |
| 2 | DEBARKER | Manitowoc | 1 |
| 3 | GRINDERS | Tampella T1812 | 4 |
| 4 | GRINDER MOTORS | EM 7000HP AC 327rpm | 5 |
| 5 | PRESSURIZED DISC THIKENER | Hedemora | 1 |
| 6 | STOCK CONTROL SYSTEM | Bailey Infi 90 | 20 |
| 7 | PRIMARY COURSE SCREEN | Bird 400 0.032″ slots | 2 |
| PRESSURE SCREEN | In PGW (North East Bay) | 1 | |
| PRESSURE SCREEN Basket | In PGW (North East Bay) | 1 | |
| 8 | SECONDARY SCREEN | Ahlstrom F2 0.032″ slots | 1 |
| 9 | AIR COMPRESSOR | Gardner Denver ElectraSaver | 1 |
| 10 | PORTABLE CRANE | 4000lb. Owantona Tool Co. | 1 |
| 11 | SELF PRIMING PUMP | Gorman T-Series centrifugal | 1 |
| 12 | CITY WATER PUMP | Syncoflo | 2 |
| 13 | WELDER | Lincoln Arc | 1 |
| 14 | OILING SYSTEM | Vickers Lube DoubleA Hydpum | 1 |
| 15 | HYDRAULIC SYSTEM | Atlas Cepco/Sperry Vickers | 1 |
PAPER MACHINE |
|||
| NUM | COMPONENT | DESCRIPTION | QTY |
| 1 | #43 HEADBOX | Voith W-7500 max12400gpm | 1 |
| 2 | #43 COUCH VACUUM | (2)Siemens2BE3,Nash L-10 | 3 |
| 3 | #43 SUCTION PICK UP VACUUM SOURCE | Siemens 2BE3,Liquid Ring | 2 |
| 4 | #43FIRST PRESS VACUUM | Nash CL-9002,(2) Siemens | 3 |
| 5 | #43 SUCTION FELT VACUUM | Nash 904-S1 | 2 |
| 6 | #43UHLE BOXES Vacuum | Siemens,Nash CI_9002 | 2 |
| 7 | #43 COATED DRYING | Solaronics gas fired 5 rows | 5 |
| 8 | #43 FAN PUMP | Goulds 3420 low-pulse | 1 |
| 9 | #43 FAN PUMP MOTOR | ABB 945hp/875rpm | 1 |
| 10 | #43 PRESSURE SCREEN | Bird 50 .047″Alstrom basket | 1 |
| 11 | #43TAILINGS SCREEN | Jonsson vibrating 39.5×55″ | 2 |
| 12 | #43COATING SUPPLY FILTERS | Ronningen-Petter | 5 |
| 13 | #44HEADBOX | Voith W-8500 | 1 |
| 14 | #44COUCH VACUUM | Siemens 2BE3,Liquid Ring | 1 |
| 15 | #441ST PRESS VACUUM | Siemens 2BE 1605 | 1 |
| 16 | #442ND PRESS VACUUM | Siemens 2BE 1606 | 1 |
| 17 | #44 COATING SUPPLY FILTERS | Ronningen-Petter DCF-2000 | 4 |
| 18 | #44THICKSTOCKSCREENING | Black Clawson .008″ 3 stage | 1 |
| 19 | #44BLEND CHEST PUMP | Goulds #3175 15″dia. Impeller | 1 |
| 20 | #44MACHINECHEST PUMP | Goulds #3175 17.75dia. Imp. | 1 |
| 21 | #44FAN PUMP | Goulds#3420 split low pulse | 1 |
| 22 | #44TAILING SCREENS | Jonsson vibrating 39.5×55″ | 2 |
| 23 | #44 PRESSURE SCREEN | Voith 31 .047″rotor3rows 9van | 1 |
STOCK PREP |
|||
| NUM | COMPONENT | DESCRIPTION | QTY |
| 1 | REFINER | Beloit 42″ DD4000 | 1 |
| MOTOR | Louis Allis 1500 horse AC | 1 | |
| 2 | REFINER | Sprout Waldron 42″ | 1 |
| MOTOR | 1 | ||
| MOTOR | In North Mill | 2 | |
| 3 | REFINER | Sprout Bauer 34″ R-34TF III | 1 |
| MOTOR | 1 | ||
| 4 | REFINER | Beloit 20″ (Rebuilt by J&L) | 2 |
| 5 | WET LAP | Andritz Hymac 100″ twin wire press | 1 |
| 6 | SCREW PRESS | Thune SP45L 134″ | 1 |
| 7 | TWIN WIRE PRESS | Andritz 2.6 Meter (145tpd) 300t twp | 2 |
| 8 | DRUM WASHER | Impco / 4 shower heads per drum | 2 |
| 9 | REPULPER | Voith Sulzer 344tpd | 1 |
| 10 | BROKEPULPER | Voith Sulzer with Guillotine | 1 |
ELECTRICAL |
|||
| NUM | COMPONENT | DESCRIPTION | QTY |
| 1 | MOTOR CONTROL CENTERS | Allen Bradley Centerline | 32 |
| 2 | MOTOR CONTROL CENTERS | Cutler Hammer IT | 1 |
| 3 | MOTOR CONTROL CENTERS | Cutler Hammer Freedom | 6 |
| 4 | MOTOR CONTROL CENTERS | Cutler Hammer Unitrol | 15 |
| 5 | MOTOR CONTROL CENTERS | Furnas System 89 | 3 |
| 6 | MOTOR CONTROL CENTERS | Furnas System 89 | 1 |
| 7 | MOTOR CONTROL CENTERS | GE 8000 Line | 6 |
| 8 | MOTOR CONTROL CENTERS | GE 7700 Line | 9 |
| 9 | 480 VOLT AC MOTORS | 10-2100 HP | 941 |
| 10 | 460VOLT AC MOTORS | 10-200HP | 72 |
| 11 | 125 VOLT AC MOTOR | 2500HP | 1 |
| 13 | 4160 VOLT AC MOTORS | 200-1300 HP | 45 |
| 14 | 575 VOLT AC MOTOR | 945 HP | 1 |
| 15 | 500 VOLT DC MOTORS | 10-800HP | 76 |
| 16 | 600 VOLT DC MOTOR | 1000 HP | 1 |
SPECIALTY |
|||
| NUM | COMPONENT | DESCRIPTION | QTY |
| 1 | DEWIRE/DESTACK | Advanced Dynamics | 1 |
| 2 | ROLL GRINDER | Cincinnati 50×338″ | 1 |
| 3 | LATHE | LeBlond 19″swingx144″ | 1 |
| 4 | LATHE | LeBlond | 1 |
| 5 | JAGENBERG VARI-ROLL WINDER | Unwind 110″dia. 6200fpm | 1 |
| 6 | STEAM TURBINE/GENERATOR | GE 12MW 450#/50#/cond | 1 |
| 7 | SLUDGE PRESS | Andritz 30dtpd | 2 |
| 8 | PULVERIZER | CE-Raymond 372 | 2 |
| 9 | PULVERIZER | CE-Raymond 453 | 1 |
| 10 | CHEMICAL MIXER | Andritz HCM3HH 300hp motor | 1 |
| 11 | MOTOR for Andritz Unit | 300hp | 1 |
| 12 | AUGER for Andritz Unit | 1 | |
Regards
EJ
Eric J. Spirtas
NIAGARA Development, LLC
Site Address:
1101 Mill Street
Niagara Wisconsin, 54151
Offices:
11469 Olive Blvd – Suite #124
Creve Coeur, MO 63141
314.780.3742 Direct
314.432.2429 Fax
ericspirtas@ejspirtasgroup.com
www.ejspirtasgroup.com
Globalcontractor's Blog 
